Robot Motor Kit DC Motor 3-6V Gear motor TT motor with Tire/Wheel Motor Drive controller HC-SR04 Ultrasonic Module Distance Sensor for Arduino Robotic AIProject Starter STEM Kit Raspberry pi Smart Car

$25.99

Category:

Description

Price: $25.99
(as of Jan 27,2023 19:25:56 UTC – Details)



Electronic Motor Kits Series for Arduino Motor, Raspberry Pi, AI Project, Robotics Set,STEAM KIT,Kids Adults Starters,electronic products DIY, etc. Arduino Motor and Tire/Wheels: Rate voltage: DC 3V6V Reduction ratio: 1:48 3V170mA; 120RPM, 0.7KGf.cm torque Size of the motor: 64.2×22.5×22.5mm(without the shaft) Diameter of the tire: 67mm/2.6 Width of the tire: 27mm/1.06 Ultrasonic Sensor HCSR04 Technical Specification Power Supply :+5V DC; Quiescent Current : 3mA; Working Current: <5mA; Effectual Angle: <15Degree; Ranging Distance : 2cm 300 cm/1 10ft; Resolution : 0.3 cm; Measuring Angle: 30 degree; Trigger Input Pulse width: 10uS; Dimension: 45mm x 20mm x 15mm HCSR04 Module Working Principle A: Pull the Trig pin to high level for more than 10us impulse, the module start ranging. B: The module automatically sends eight 40KHz square wave to detect whether a signal is returned. C: Finished ranging, If you find an object in front, Echo pin will be high level, and based on the different distance, it will take the different duration of high level. D: So we can calculated the distance easily. The distance ((Duration of high level)x(Sonic :340m/s))/2. Distance L 1/2 × T × C L298N Motor Drive Controller Specification: ·Logic voltage: 5V; ·Logic current 0mA36mA; ·Storage Temperature: 20 Degree C to Degree C to +135;·Operating mode: Hbridge driver (dual) ;·Drive voltage: 5V35V; ·Drive current: 2A (MAX single bridge) ;·Maximum power: 25W; ·Dimensions: 43x43x27mm Note: ·This module has a builtin 5v power supply, ·DO NOT input voltage to +5v supply interface, however ledding out 5v for external use is available. ·When ENA enable IN1 IN2 control OUT1 OUT2 ·When ENB enable IN3 IN4 control OUT3 OUT4 Package: 4pcs xDC motors+ Tires/wheels 1pc x HCSR04 Ultrasonic Sensor 1pc xL298N motor Drive Controller 1pc x40pin male to female Multicolorful Dupont jumper wires
【Robot motor Kit】: 4pcs TT Motor with 1:48 reduction ratio and plastic Robot Wheels/tires with tread pattern; Electric motor Operating voltage: 3V-6V DC motors (Recommended Value is 3V);Maximum torque: 800g.cm (3V);Great for RC car DIY or other electronic production; Size of the tire: OutsideΦ67mm/2.6″; Width 27mm/1.06″.
【Ultrasonic Sensor HC-SR04 】distance measuring transducer sensor, HC-SR04 consists of ultrasonic transmitter, receiver, and control circuit. When trigged it sends out a series of 40KHz ultrasonic pulses and receives echo from an object. Power supply: 5V DC; quiescent current: less than 2mA; effectual angle: less than 15°; distance: 2cm500cm; resolution: 0. 3 cm~
【Motor Drive Controller】: L298N Dual-channel H-bridge driver working mode creates higher working efficiency,L298N as main chip.Can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors. (**NOTE** To avoid damage the voltage stabilizing chip, please use an external 5V logic supply when using more than 12V driving voltage.)
【Jumper Wires/Cables】These Multicolorful Dupont wires can be separated to form an assembly containing the number of wires you require for your connection and to support non-standard odd-spaced headers.This is 40-pin male to Female Jumer cable, the length: about 20 cm /8-inch.
【CUSTOMER SERVICE】: If quality problems for the products or usage, please contact us via buyer-seller message, we will solve it as what you like to within 24 hours. Ideal for Arduino,AI project, Starter kit, STEAM KIT,Raspberry Pi, Kids Adults etc.

Reviews

There are no reviews yet.

Be the first to review “Robot Motor Kit DC Motor 3-6V Gear motor TT motor with Tire/Wheel Motor Drive controller HC-SR04 Ultrasonic Module Distance Sensor for Arduino Robotic AIProject Starter STEM Kit Raspberry pi Smart Car”

Your email address will not be published. Required fields are marked *